Â鶹Éçmadou
Back to
Dr Clay (Guoyu) Chu

Dr Clay (Guoyu) Chu

Lecturer
Engineering
Electrical Engineering and Telecommunications

Dr Clay (Guoyu) Chu is a Lecturer and Senior Research Associate in Energy Systems with the School of Electrical Engineering and Telecommunications, Â鶹Éçmadou Sydney. He is passionate about contributing to decarbonization through innovating more advanced electric drive and energy conversion technologies. He has recently been awarded the Australian Research Council's Early Career Industry Fellowship ($447k) and the Malcolm Chaikin Prize for Research Excellence in Engineering in 2023 for his research works in the more sustainable high-speed motor design and drive fields. The other awards and grants Dr Chu received includes the Australia’s Economic Accelerator Seed Grant ($198k), Â鶹Éçmadou DGFI Seed Fund ($25k), and Â鶹Éçmadou Faculty Infrastructure Funding ($350k).

Dr Clay Chu received his B.E. degree in electrical engineering and automation from the Shandong University of Science and Technology, China, in 2014, and the M.E. degree in electrical engineering from the Â鶹Éçmadou Sydney, Australia, in 2016. After completing his hardware engineer internship at Ventia, he joined Â鶹Éçmadou again in 2017 to pursue his Ph.D. degree in electrical engineering and received it with the Dean's Award in 2021.

His research interests include:

  • Design and optimization of high-speed electric machines
  • Permanent magnet synchronous motors & generators
  • Multiphysics multi-objective design optimizations
  • Sensorless drive and control of electric machines
  • Design and modelling of electromagnetic systems
  • Flywheel energy storage system (design, drive, and control)
  • Synchronous condenser and inverter-based systems for grid stability
  • Inertia and frequency control of grids with high renewable penetration
E-mail
g.chu@unsw.edu.au
Location
School of Electrical Engineering and Telecommunications (Building G17) Level 1, Room 118
  • Journal articles | 2024
    Gao M; Chu G; Xiao D; Rahman A; Dutta R, 2024, 'Loss Minimization Control of a High-Speed Interior Permanent Magnet Machine', IEEE Transactions on Industry Applications, 60, pp. 7001 - 7012,
    Journal articles | 2023
    Chu G; Dutta R; Xiao D; Fletcher JE; Rahman MF; Rahman F, 2023, 'Development and Optimization of a Mechanically Robust Novel Rotor Topology for Very-high-speed IPMSMs', IEEE Transactions on Energy Conversion, 38, pp. 1781 - 1792,
    Journal articles | 2023
    Rahman A; Dutta R; Chu G; Xiao D; Thippiripati VK; Rahman MF, 2023, 'Open-Winding Permanent Magnet Synchronous Generator for Renewable Energy—A Review', Energies, 16,
    Journal articles | 2020
    Chu G; Dutta R; Pouramin A; Rahman MF; Rahman F; Pouraminaein A, 2020, 'Analysis of torque ripple of a spoke-type interior permanent magnet machine', Energies, 13, pp. 2886,
    Journal articles | 2020
    Chu G; Dutta R; Rahman MF; Lovatt H; Sarlioglu B; Rahman F, 2020, 'Analytical Calculation of Maximum Mechanical Stress on the Rotor of Interior Permanent-Magnet Synchronous Machines', IEEE Transactions on Industry Applications, 56, pp. 1321 - 1331,
  • Conference Papers | 2024
    Gao M; Chu G; Rahman A; Dutta R, 2024, 'Analysis of Machine Inductance Variation on Loss Minimization Control', in 2024 International Conference on Electrical Machines ICEM 2024,
    Conference Papers | 2024
    Rahman A; Dutta R; Chu G; Gao M; Xiao D; Rahman MF, 2024, 'Effect of Partial Demagnetization on Speed in Permanent Magnet Synchronous Machine', in 2024 IEEE Energy Conversion Congress and Exposition Ecce 2024 Proceedings, pp. 5269 - 5274,
    Conference Papers | 2023
    Gao M; Chu G; Dutta R; Rahman A; Xiao D, 2023, 'Improvement of Inductance Measurement of IPMSM', in 2023 IEEE Energy Conversion Congress and Exposition Ecce 2023, pp. 4302 - 4307,
    Conference Papers | 2023
    Gao M; Chu G; Dutta R; Rahman A, 2023, 'Improved Deadtime Compensation Method Considering Currrent Ripple', in 2023 IEEE International Conference on Energy Technologies for Future Grids Etfg 2023,
    Conference Papers | 2023
    Rahman A; Dutta R; Chu G; Xiao D; Gao M; Rahman MF, 2023, 'Analysis of Zero Sequence Current in an Open Winding Permanent Magnet Synchronous Machine Under Rotor Magnet Fault Condition', in 2023 IEEE Energy Conversion Congress and Exposition Ecce 2023, pp. 5321 - 5328,
    Conference Papers | 2023
    Rahman A; Dutta R; Chu G; Xiao D; Gao M; Rahman MF, 2023, 'Suppression Analysis of Zero-sequence Current Under Magnet Fault in an Open-winding Permanent Magnet Synchronous Machine', in 2023 IEEE International Conference on Energy Technologies for Future Grids Etfg 2023,
    Conference Papers | 2022
    Gao M; Chu G; Dutta R; Xiao D, 2022, 'Loss Analysis of a High-Speed IPMSM using Different Trajectory Control', in 2022 IEEE Energy Conversion Congress and Exposition Ecce 2022,
    Conference Papers | 2022
    Rahman A; Xiao D; Chu G; Dutta R; Rahman MF, 2022, 'Performance analysis of MPC-based Zero Sequence Current Controllers in an Open- Winding PMSM', in 2022 IEEE 7th Southern Power Electronics Conference Spec 2022,
    Conference Papers | 2021
    Chu G; Dutta R; Fletcher J; Lovatt H; Rahman MF, 2021, 'Analytical Calculation of the Mechanical Stress on IPMSM Bridges with Decomposition of the Centrifugal Force', in 2021 IEEE Energy Conversion Congress and Exposition Ecce 2021 Proceedings, pp. 4639 - 4645,
    Conference Papers | 2020
    Chu G; Lovatt H; Rahman MF; Dutta R, 2020, 'Comparative Analysis of Different Halbach Array Structures in the Design Optimization of an In-wheel Permanent Magnet Machine for Land Speed Racing', in Ecce 2020 IEEE Energy Conversion Congress and Exposition, pp. 1800 - 1805,
    Conference Papers | 2019
    Chu G; Pouramin A; Dutta R; Rahman MF; Lovatt H; Sarlioglu B, 2019, 'A new mechanical-strength-oriented rotor parametric model design for the optimization of a very-high-speed IPMSM', in 2019 IEEE Energy Conversion Congress and Exposition Ecce 2019, pp. 6092 - 6098,
    Conference Papers | 2018
    Chu G; Dutta R; Lovatt H; Sarlioglu B; Rahman MF, 2018, 'Analytical Calculation of Maximum Mechanical Stress on the Rotor of the Interior Permanent-Magnet Synchronous Machine', in 2018 IEEE Energy Conversion Congress and Exposition Ecce 2018, pp. 255 - 261,
    Conference Papers | 2018
    Chu G; Dutta R; Rahman MF, 2018, 'Investigation of the Stress Concentration Factor for Estimating Maximum Mechanical Stress of Interior Permanent-Magnet Machines', in Proceedings - 2018 23rd International Conference on Electrical Machines, ICEM 2018, pp. 798 - 804,

  • 2025 ARC Discovery Project Grant, DP250100812 ($768k, CI) 
    • Lightweight, Low Rare-earth, Permanent Magnet Motors for Electrified Future
  • 2024 Australia’s Economic Accelerator Seed Grant, AE240300143 ($198k, Co-Entrepreneur)
    • Developing a Novel High-Efficiency Micro-Electric Vehicle Motor 
  • 2023 ARC Early Career Industry Fellowships Project, IE230100467 ($447k, Sole-CI)
    • A More Sustainable High-speed Drive System for Air Conditioning Systems
  • 2023 Â鶹Éçmadou DGFI Seed Fund ($25,000, Sole-CI)
  • 2023 Â鶹Éçmadou Faculty Infrastructure Funding ($350k)

  • Dean’s Award for Outstanding PhD Theses, 2022
  • ARC Early Career Industry Fellowship, 2023
  • Malcolm Chaikin Prize for Research Excellence in Engineering, 2023
  • Associate Fellow of Higher Education Academy, 2023
  • Third Prize Paper Award - 2024 IEEE ECCE, 2024

My Research Supervision

High-speed electric drive systems

Fault diagnosis and post-fault control of electric machines

Wide bandgap switches for high-frequency drive applications

My Teaching

Teaching Experience:

  • ELEC 3115 - Electromagnetic Engineering (Labs & Workshop)
  • ELEC 4613 - Electric Drive Systems (Lectures, tutorials, and labs)
  • ELEC 4123 - Electrical Design Proficiency (Lead lecturer)
  • ELEC 9711 - Power Electronics for Renewable and Distributed Generation